IGuard Solution

See the Web Server in Action

Each iGuard Biometric / Smart Card Security Appliance has a built-in Web Server enables all the computers in the corporate network to directly simultaneously access the device using any Internet Browser, such as Microsoft Internet Explorer Netscape Navigator. Different computer platforms such as Apple Macintosh, Microsoft Windows Linux machines can access the device. No additional software is required. So whether you are in an airport lounge or a hotel room, you can always check if your employees are already in the office or not, and you can even control, modify or disable their access rights to your office remotely via internet connection provided your iGuard Biometric / Smart Card Security Appliance is connected to an external IP address or your network is available through a VPN connection that is reachable from your location.

 

IGuard Features 

With iGuard, users can be authenticated and verified through either Fingerprint,Smartcard or Password. And depending on the different time period, you can set up the iGuard that the users can just simply presents his smartcard to get authorized (such as during high-traffic period), or requires the high-security fingerprint verification (such as after office hours or during weekends and holidays).

 

 

AVI Infosys

Technical Specification

 

 
 
  SC / FSC / FOSC SuperMaster
Power 12VDC, 600mA 12VDC, 800mA
Fingerprint Sensor n/a / Capacitive / Optical n/a
Contactless Smart Card reader writer (built-in) Yes n/a
Web and Database Server Built-in
Network Security (SSL) Optional
Auto Data Synchronization (i.e.,master / slave configuration) Yes
Maximum Transaction Records stored 10,000 20,000
Static / Dynamic IP Assignment Yes(Support existing DHCP Server)
Non-volatile memory 16MB 32MB
Computer Supported (with Internet Browser) Macintosh,Windows 95/98/NT/ME/XP, Linux and Unix Machine
Valid Characters for Employee ID 0-9, A-B(maximum - 10 characters)
Display 16 x 2 LCD with Backlight 16 x 2 LCD with Backlight
LCD Multi-Lingual Yes Yes
Two Finger Enrollment Yes
Fingerprint Sensor Type n/a / Capacitive / Optical n/a
Fingerprint Sensor Resolution 500dpi n/a
Fingerprint Sensor scan area (mm) 12 x 15 n/a
Image Capture Time < 1 sec. n/a
Verification Time < 1 sec. n/a
False Rejection Rate < 1 % n/a
False Acceptance Rate < 0.01% n/a
Auto-match Count 30 n/a
Network Protocol TCP/IP, HTTP
Network Interface Ethernet (10-Base T) Ethernet (100-Base T)
Other Interface Wiegand (Output Only)
Real Time Clock Last for approx. 2 days without power
External Controls Door Strike
Open-Door 
Switch
Break-in Alarm 
Door Status
n/a
Dimension (mm) SC/FSC : 105(W) x 38(D) x 150(H) 
FOSC : 105(W) x 55(D) x 150(H)
254(W) x 193(D) x 61(H)
Certification
AVI Infosys  AVI Infosys
Pending

 

 

LAN/WAN Network Configuration

 

LAN Network

A typical network diagram showing multiple iGuard Systems connected through a corporate network. Each iGuard is assigned its own specific IP address. These systems can be set up in a master / slave configuration so that biometric template data is replicated automatically throughout the network on each iGuard. Optionally, the template matching can be performed on a secure server at a single point on the network. For this type of environment, the

 


iguard Client/Server iGuard is necessary.

 

 

 

WAN Network

This diagram shows multiple iGuard units connected through the Internet or over a WAN. This environment requires the master/slave c

iguardonfiguration for template matching because of the latency on the network when retrieving templates and matching them to a central database over the WAN.